EQUIPPED WITH:
* Single Operator, 4 Stations
* Keyed Punch Ram For Safety
* Punch Gauging Table With Fence & Scale
* Die Holder With 2" Die Insert
* Punch Nut With Wrench & Stripper
* Jog Control
* Adjustable Electric Stroke Control W/Scale
* Electric Remote Foot Pedal
* Shear Table w/Miter Fence
* Slug Receptacle
* Two-stage Hydraulic Pump
* Electrical Box Supplied With Emergency Palm Button And Lock-Out Tag-Out Accommodations
* All Guards Comply With ANSI B 11-5 Standards
* Forklift Accommodations
* Three-year warranty (Parts only)
NOTES:
SPECIFICATIONS SUBJECT TO VERIFICATION
OPTIONAL FEATURES:
* Single Phase Motor, 5 hp 220 volt / 60 Hz: $500.00
* L.E.D. Light Package-XL/DO (Factory Installation): $495.00
* Laser Light - Bar Shear (Factory Installation): $1,075.00
* Punch Extension Table: $295.00
* 36" Punch Gauging Extension - LH: $795.00
* 36" Punch Gauging Extension - RH: $795.00
* 85" Punch Gauging Extension - LH: $1,495.00
* 85" Punch Gauging Extension - RH: $1,495.00
* Tool Table Extension W/ Punch & Die Drawer (100 lbs. Max): $795.00
* 48" Deluxe Back Gauge: $825.00
* 48" Electric Back Guage (XL/FI): $2,350.00
* LG Measuring Package (SO/DO): $525.00
* Infeed Conveyor (24" X 5 Foot w / Support Arms): $3,295.00
* 12" Brake (With 2" V opening dies standard - For 1/4" material): $3,252.00
* 24" Brake (With 2" V opening dies standard - For 1/4" material): $3,245.00
* 12" Brake Table With Scale & Squaring Arm: $425.00
* 24" Brake Table With Scale & Squaring Arm: $495.00
* Brake Length Gauge With Scale: $225.00
* Open End Brake (Max 1/4" x 5" Flat or 1/4" x 5" Angle Iron): $1,625.00
* Pipe Notcher Housing (Separate Dies Required For Each Size): $370.00
* 3/4" Schedule 40 Pipe Upper & Lower Dies - Set: $620.00
* 1" Schedule 40 Pipe Upper & Lower Dies - Set: $620.00
* 1-1/4" Schedule 40 Pipe Upper & Lower Dies - Set: $645.00
* 1-1/2" Schedule 40 Pipe Upper & Lower Dies - Set: $645.00
* 2" Schedule 40 Pipe Upper & Lower Dies - Set: $675.00
* Punch pusher For Pipe Notcher: $125.00
* Tool Table Pusher For Pipe Notcher: $155.00
* Rectangle Notcher 2" x 2-1/2" x 3/8": $2,425.00
* 90° V-Notcher (6" x 6" x 5/16"): $2,675.00
* Channel Shear (2" to 6" adjustable): $4,475.00
* Rod Shear (Up To 1" Square or 1-1/4" Round): $2,325.00
* Square Tube Shear (1/2" to 2" – 14 Gauge Max): $1,595.00
* Picket Tool Housing (Separate Dies Required For Each Size) *Mounts in the punch station only: $1,195.00
* 1/2" 14 Gauge Max. Upper & Lower Dies: $395.00
* 3/4" 14 Gauge Max. Upper & Lower Dies: $395.00
* 1" 14 Gauge Max. Upper & Lower Dies: $395.00
* #45 Retaining Nut (Punching From 1-9/32" to 1-9/16"): $90.00
* Heavy Duty Retaining Nut (Oversized punching from 1-19/32" to 4"): $395.00
* Wrench For Heavy Duty Retaining Nut: $50.00
* Die Insert for 2-1/2" O.D. dies: $175.00
* Die Insert for 3" O.D. dies: $195.00
* Die Holder For 6" x 6" Dies: $595.00
* Offset die holder for flange punching (2" O.D. dies only – maximum 40 ton): $850.00
* Stripper for offset die holder (includes guard): $410.00
* Urethane Punch Stripper - #40 Standard Punches Only (Maximum Sizes:  3/4" Round, 3/4" Oval, 11/16" Square & 3/4" Hex): $75.00
* Urethane Stripper Assembly: $2,925.00
* Unequal leg angle shear blade – 66° - (4" x 3-1/2", 3-1/2" x 3", 3" x 2-1/2"): $495.00
* Unequal leg angle shear blade – 70° - (4" x 3", 2-1/2" x 2", 2" x 1-1/2"): $495.00
* Unequal leg angle shear blade – 74° - (6" x 4", 5" x 3-1/2", 3" x 2"): $495.00
* Unequal leg angle shear blade – 80° - (6" x 3-1/2", 5" x 3"): $495.00
* Upper Angle Blade Quick Change Hardware: $395.00
* Angle Shear (6" x 6" x 1/2"): $2,295.00
* Angle Iron Miter Guide: $70.00
* Unistrut Shear (XL & DO) (Please Call to Inquire About Other Material Profiles) (Material Sample Required for All Orders Prior To Order Approval): $POR
* Weld Coupon Bender - 9012, 12012, DO70 & DO95 (Max 3/8"x2"x7"): $1,825.00
* Hyd. Bar Shear Hold Down (Must Be Factory Installed): $2,250.00
* Economy #40 Punch & #82 Die Package (16th) Includes: 12set of round punches & dies: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1: $350.00
* Economy #40 Punch & #82 Die Package (32nd) Includes: 12set of round punches & dies: 11/32, 15/32, 17/32, 19/32, 21/32, 23/32, 25/32, 27/32, 29/32, 31/32, 1-1/32, 1-3/16: $350.00
* Economy #40 Punch & #82 Die Package (Metric) Includes: 12 sets of round, metric punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, 30, & 32: $350.00
* Deluxe #40 Punch & #82 Die Package Includes: Rounds: 1/4, 9/32, 5/16, 3/8, 13/32, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4; Squares: 1/2, 3/4, 7/8; and Ovals:  9/32 x 3/4, 5/16 x 3/4, 9/32 x 1, 5/16 x 1, 13/32 x 1, 7/16 x 1, 17/32 x 1, 9/16 x 1, 9/16 x 1-1/4, 11/16 x 1-1/4, 13/16 x 1-1/4: $1,150.00
* 12" Brake Package: 12" Brake, Brake Length Gauge w/Scale, & 12" Brake Table w/Scale & Squaring Arm: $2,475.00
* 24" Brake Package: 24" Brake, Brake Length Gauge w/Scale, & 24" Brake Table w/Scale & Squaring Arm: $3,375.00
* Pipe Notcher Package: Housing, 1-1/4" Sch. 40 Pipe Dies, 1-1/2" Sch. 40 Pipe Dies, Tool Table Pusher, & Punch Pusher: $1,395.00
* Channel Shear Package: Channel Shear (2" to 6" Adjustable), Offset Die Holder (For Flange Punching), & Stripper for Offset Die Holder: $5,495.00
* Productivity Package: Infeed Conveyor (24" x 5' w/Support Arms), Laser Light for Bar Shear, LED Light Package, Punch Table Extension, 48" Deluxe Back Gauge, & Tool Table Extension W/ Punch & Die Drawer: $5,395.00
* Productivity Package: Infeed Conveyor (24" x 5' w/Support Arms), Laser Light for Bar Shear, LED Light Package, Punch Table Extension, 48" Electric Back Gauge, & Tool Table Extension W/ Punch & Die Drawer: $6,550.00
DELIVERY:
SUBJECT TO STOCK