SPECIFICATIONS:*CAPACITY:
CENTER HEIGHT 7.48” (190 MM)
SWING OVER BED Ø 15” (380 MM)
SWING OVER CROSS SLIDE Ø 9.37” (238 MM)
DISTANCE BETWEEN CENTERS 50” (1,250 MM)
*HEADSTOCK:
SPINDLE NOSE, INTERNAL TAPER D1-6, MT #6
SPINDLE CENTER SLEEVE MT #6 X MT #4
SPINDLE BORE Ø 2.2” (56 MM)
SPINDLE SPEEDS 16 STEPS
SPINDLE SPEED RANGE 25 - 2,000 RPM
GEARED STEPS SILVER: 25 ~ 80 ~ 260 ~ 840 RPM
GOLDEN: 33 ~ 108 ~ 350 ~ 1,120 RPM RED: 45 ~ 140 ~ 470 ~ 1,500 RPM
BLACK: 60 ~ 190 ~ 625 ~ 2,000 RPM
*CARRIAGE:
LENGTH ON BED 19” (484 MM)
WIDTH OF CARRIAGE 17.71” (450 MM)
CROSS SLIDE TRAVEL 9.25” (235 MM)
TOP SLIDE TRAVEL 4.72” (120 MM)
*BED:
NUMBER OF "V" WAYS 3 EACH “V” WAYS
BED WIDTH 11” (280 MM)
GAP WIDTH IN FRONT OF FACEPLATE 10.43” (265 MM)
SWING IN GAP Ø 24” (610 MM)
*TAILSTOCK:
QUILL DIAMETER Ø 2.32” (59 MM)
QUILL CENTER MT #4
QUILL TRAVEL 5” (127 MM)
*FEEDS & THREADS:
RANGE OF INCH THREADS & NO. 2 - 72 T.P.I (45)
RANGE OF METRIC THREADS & NO. 0.2 - 14 (39)
RANGE OF D.P. & NUMBER 8 - 44 (21)
RANGE OF M.P. & NUMBER 0.3 - 3.5 (18)
LONGITUDINAL FEED 0.0015" - 0.04” (0.04 - 1.0 MM)
CROSS FEEDS 0.00075" - 0.02” (0.02 - 0.5 MM)
MAIN MOTOR 7.5 HP (5.6 KW)
COOLANT PUMP ⅛ HP (0.1 KW)
*MEASUREMENT:
NET WEIGHT 3,197 LBS (1,450 KGS)
GROSS WEIGHT 3,549 LBS (1,610 KGS)
LENGTH PACKED 101.58” (2,580 MM)
WIDTH PACKED 44.1” (1,120 MM)
HEIGHT PACKED 74.8” (1,900 MM)
FEATURES:
• CHIP & COOLANT TRAY
• FOOT BRAKE
• FULL LENGTH REAR SPLASH GUARD
• CABLE CARRIER
• BED STOP
• LEFT HAND WHEEL GUARD
• MANUAL INDEXING SQUARE 4-POSITION TOOL POST
• BACK PLATE (TO MOUNT PLAIN BACK 3 OR 4 JAW CHUCK)
• TWO (2) NO. 4 MT CENTERS AND ONE (1) NO. 6 MT MAIN SPINDLE REDUCTION SLEEVE
• MATRIX DISK CLUTCH (FORWARD & REVERSE)
• LEAD SCREW PROTECTION COVER
• WORK LIGHT
• LEVELING PADS X 8 PCS
• THREADING DIAL
• INCH/METRIC DIALS ON COMPOUND & CROSS SLIDE (DIRECT READINGS)
• AUTOMATIC LUBRICATION SYSTEM
• ELECTRICS 220 VOLT, 3 PHASE, 60 HZ (OTHER OPTIONS AVAILABLE)
• COOLANT SYSTEM
• CHUCK GUARD WITH LIMIT SWITCH
• APRON FEED ADJUSTMENT
• TOOL SET & TOOLBOX
• OPERATOR'S MANUAL & PARTS LIST
NOTES:SPECIFICATIONS SUBJECT TO VERIFICATION
OPTIONAL FEATURES:SPECIAL ELECTRICS:EXTRA CHARGE FOR 440V, 3-PHASE, 60HZ* (REPLACE MOTOR): $1,468.00
HEAD/EVS/7.5HP MOTOR/ DRIVE/ JIC/ NFPA-79; NEMA 12 ELECTRIC: PRICE ON REQUEST
ELECTRONIC VARIABLE SPEED HEADSTOCK (EVS) 7.5HP, 220V: $5,813.00
ELECTRONIC VARIABLE SPEED HEADSTOCK (EVS); 440V: $5,813.00
UL-508A INDUSTRIAL CONTROL PANEL: $4,990.00
NFPA-79 ELECTRICS CERTIFICATION: PRICE ON REQUEST
STEADY RESTS:
STEADY REST: • 6” CAPACITY, • WITH ROLLERS: $1,435.00
FOLLOW REST: $680.00
3 JAW CHUCKS:
8" 3 JAW CHUCK D 1-6, DIRECT MOUNT (SEMI-STEEL)
• DIRECT MOUNT
• SEMI-STEEL: $1,755.00
10" 3 JAW CHUCK D 1-6, DIRECT MOUNT (SEMI-STEEL)
• DIRECT MOUNT
• SEMI-STEEL: $2,156.00
12" 3 JAW CHUCK D 1-6, DIRECT MOUNT (SEMI-STEEL)
• DIRECT MOUNT
• SEMI-STEEL: $2,812.00
8" 3 JAW CHUCK D 1-6, DIRECT MOUNT (STEEL BODY)
• DIRECT MOUNT
• STEEL BODY: $2,082.00
10" 3 JAW CHUCK D 1-6, DIRECT MOUNT (STEEL BODY)
• DIRECT MOUNT
• STEEL BODY: $2,304.00
12" 3 JAW CHUCK D 1-6, DIRECT MOUNT (STEEL BODY)
• DIRECT MOUNT
• STEEL BODY: $3,016.00
4 JAW CHUCKS:
10" 4 JAW CHUCK D 1-6, DIRECT MOUNT (SEMI-STEEL)
• DIRECT MOUNT
• SEMI-STEEL: $2,007.00
12" 4 JAW CHUCK D 1-6, DIRECT MOUNT (SEMI-STEEL)
• DIRECT MOUNT
• SEMI-STEEL: $2,335.00
10" 4 JAW CHUCK D 1-6, DIRECT MOUNT (STEEL BODY)
• DIRECT MOUNT
• STEEL BODY: PRICE ON REQUEST
12" 4 JAW CHUCK D 1-6, DIRECT MOUNT (STEEL BODY)
• DIRECT MOUNT
• STEEL BODY: PRICE ON REQUEST
CHUCKS & FACE PLATES FOR ALL OPTIONAL CHUCKS:
BACK PLATE OR DOG PLATE 8" FOR D1-6 SPINDLE NOSE: PRICE ON REQUEST
FACE PLATE 14" FOR D1-6 SPINDLE NOSE: $691.00
DRILL CHUCK ½” (KEY TYPE) WITH NO.4 MORSE TAPER SHANK: PRICE ON REQUEST
DRILL CHUCK 3/4” (KEY TYPE) WITH NO.4 MORSE TAPER SHANK: PRICE ON REQUEST
DIGITAL READ-OUTS (DRO):2-AXIS ACU-RITE DRO203 FOR 10 X 50 LATHE (INSTALLED): $4,324.00
2-AXIS ACU-RITE DRO303 FOR 10 X 50 LATHE W/CSS AND THREAD ASSIST (INSTALLED): PRICE ON REQUEST
2-AXIS FAGOR 40I DRO W/ CSS FOR EVS 10 X 50 LATHE (INSTALLED)
• CONSTANT SURFACE SPEED (C.S.S.)
• 4 GEAR RANGE: PRICE ON REQUEST
NEWALL NMS 800 2-AXIS DRO, FOR LATHES 10 X 50 (INSTALLED): $4,701.00
SAFETY OPTIONS:
ARRIAGE STOP - 5 POSITION BED W/ MICROMETER STOP
• 5 POSITION BED WITH MICROMETER: $466.00
MICROMETER CARRIAGE STOP: PRICE ON REQUEST
TAPER ATTACHMENT: $2,071.00
QUICK CHANGE TOOL HOLDERS:
QUICK CHANGE TOOL HOLDER SET CXA #3
• 5 PC.: 1 TOOL POST & 4 HOLDER
• CAPACITY ¾”: PRICE ON REQUEST
QUICK CHANGE TOOL HOLDER SET CXA #3
• 7PC. (1 TOOL POST & 6 HOLDERS)
• CAPACITY ¾”: $2,464.00
COLLETS:
COLLET CLOSER, 5C LEVER TYPE PRODUCTION (UP TO 1 1/16” CAP), D1-6 FOR 15": $2,765.00
HANDWHEEL FRONT TYPE COLLET CHUCK, 5C, D1-6 (SPINDLE NOSE MOUNTED): $3,132.00
COLLETS 5C ; 16 PIECES, 1/8" TO 1 1/16" CAPACITY: $969.00
HANDWHEEL FRONT TYPE COLLET CHUCK, 16C, D1-6 (SPINDLE NOSE MOUNTED): $2,280.00
HYDRAULIC COPY ATTACHMENT:
HYDRAULIC TAPER & COPYING SYSTEM (FULL CENTER DISTANCE RANGE)
• “HYDRAULIC TAPER” & “FULL LENGTH PROFILE CUTTER” WILL NEED TO FOLLOW A TEMPLATE
• NOTE: EASY TO USE & WILL NOT WEAR OUT WITH USE AS A MECHANICAL TAPER ATTACHMENT
• IDEAL FOR API THREADING ETC. (ASK FOR VIDEO SHOWING APPLICATION): $9,920.00
SUBJECT TO STOCK
