SPECIFICATIONS:
Machine Type -------------------- H-frame hydraulic powered
Capacity ------------------------ 70-tons
Maximum Operating Pressure ------ 280 bars
Minimum Operating Pressure ------ 15 bars
Ram Diameter -------------------- 3.543 in
Ram Travel ---------------------- 19 in
Bore ---------------------------- 6.299 in
Ram Rapid Advance Speed --------- 42 i.p.m.
Ram Pressing Speed -------------- 4 i.p.m.
Horse Power --------------------- 2 HP
Hydraulic Pump ------------------ 2 centrifugal pumps
Controls ------------------------ Panel mounted 24-volt CE approved
Filter Type --------------------- Cartridge type external access
Oil Capacity -------------------- 14 U.S. gallons approx (not included)
Weight -------------------------- 1595 lbs
Overall Height ------------------ 88 in
Base Width ---------------------- 63 in
Depth --------------------------- 27 in
Width Between Uprights ---------- 35 in
Width Between Table Channels ---- 8 in
Maximum Ram to Table ------------ 32 in
Minimum Ram to Table ------------ 7-1/4 in
Voltage ------------------------- Available 230V, 3PH
Available 460V, 3PH
Machine should be wired to main service by a qualified Electrician.
AMP ----------------------------- 20-amp service for 230V machine 16-amp service for 460V machine
Operating Temperature ----------- No special operating temperature level
FEATURES:
* Double acting cylinder, utilizes the pulling force to raise and lower the table via chains, eliminating the need for hoist assemblies.

* Fast, quite, dependable, economical price, smooth operating press that is very simple to operate.

* Heavy adjustable table can be set to a comfortable work height. Massive table pins keep table securely in place during the pressing operations.

* Pressure preset and locked out at factory for maximum pressing, Pressure can be increased or decreased to suit users needs, but can never be set to exceed 350 bar.

* The motor is a powerful 2 HP submerged type that runs 2 centrifugal pumps for study quiet oil flow.

* CE approved controls located in convenient locations are all low voltage, with overload protection and low-tension coils. Joystick operation for easy machine operation.

* Rapid advance of the ram to the work piece, when contact is made the machine shifts into the pressing mode.

* Remove standard nose piece and install your own custom fixturing.

* Five piece Dowty Polypak piston seals

* Replaceable external accessed oil filter, with internal filter system that can be cleaned and reused.

* Complete English owners manual.
EQUIPPED WITH:
Frame
Cylinder
Two forged steel table plates
Pressure Gauge
Lifting Chain
NOTES:
SPECIFICATIONS SUBJECT TO VERIFICATION
DELIVERY:
IMMEDIATE, SUBJECT TO PRIOR SALE