1 – NEW KINGSTON 56″ x 160″ CNC LATHE, C TYPE, MODEL #: CSX x 4000

SPECIFICATIONS
FILES & ATTACHMENTS

Swing Over Bed	59 inches
Swing Over Cross Slide	35.4 inches
Max Turning Diameter – 2 Turrets	29.5 inches
Distance Between Centers	160 inches
Width of Bed	39.4 inches
Spindle Bore	7.1 inches
Spindle motor	50 / 60 HP (30 min)
Type of Spindle Nose	A2-15
Number of Speed Ranges	6 – 650
Spindle Speed	V8 Hydraulic (Std), H4 or H6 (Opt)
Max. Stroke (X-Axis)	28.9 inches
Rapid Traverse (X-Axis)	236 in/min
Rapid Traverse (Z-Axis)	236 in/min
Servo Motor (X-Axis)	5.3 HP
Servo Motor (Z-Axis)	8.0 HP
Ball Screw (X-Axis)	Ø1.41”, P6
Ball Screw (Z-Axis)	Ø2.48”, P12
Tailstock Quill (nose, taper, bearing)	A-1-8, M.T. # 6, 33024
Tailstock Quill Diameter	Ø9.4”
Tailstock Quill Travel	7.0999 inches
Overall Dimensions (L x W x H)	305" X 151" X 91"
Machine Weight	31372 pounds
Total Power Required	100 KVA

Equipped With

Features:

• Kingston's CSX is the largest and brawniest entry in its heavy-duty lineup, boasting an impressive 59" swing (35.4" over cross slide) for your largest work pieces – and a colossal 1-meter (39.4") bed width for maximal stability during the heaviest cutting. Spindle bore sizes up to 14.7" and lengths to 240" between centers – plus a powerful 60 HP motor – mean this machine can tackle anything.
Equipped With:

• 50 / 60 HP (30 min) Fanuc α40i AC Spindle Motor, 220V (only), 3 Phase, 60 Cycle

• Fanuc 0iTF-Plus Controller with Manual Guide i & Threading Repair, 10.4” LCD Monitor

• Box Way Cross Slide and Carriage

• Front & Rear Chuck Ready Spindle

• Rear Spindle Safety Door

• V8 or H4 Hydraulic Turret (front)

• Coolant System

• 39.4” Bed Width

• Tailstock with Built-in Center

• Tailstock Movable by Engaging with Carriage

• Dead Center for Tailstock MT#6

• Auto Lubrication System

• Two Doors and Full-Length Back Splash Guard

• Center Chip Conveyor (beneath bedway)

• Halogen Light

• Foundation Pads, Leveling Screws

• Tool Box & Tools

• Operation, Electric, Controller & Parts Manual
Standard Tooling Package:
• Turret V8
• Tool Center Height 1-1/4”
• Wedge Block 8 Sets
• Facing Tool Holder 1-1/4” 2 pcs
• Radial Ext. Tool Holder 1-1/4” 2 pcs
• Boring Bar Holder 2”-1/2" 4 pcs
• Boring Bar Sleeve: 2” 2 pcs,1-1/2” 2 pcs, 1-1/4” 2 pcs, 1” 2 pcs, 3/4” 2 pcs, 5/8” 2 pcs, 1/2” 2 pcs
• Drilling Sleeve MT#3 2”-1/2" 1 pc
• Drilling Sleeve MT#4 2”-1/2" 1 pc
Optional Features:

• 31.5” Steady Rest with Two Sets of Sleeves (17.7” ~ 25.7”, 25.6” ~ 31.5”) $22,300
• Roller Bracket (24.4” – 41.3”) $17,700
• 7” Boring Bar Support $11,000
• 4” Sleeve For 7” Boring Bar Support $ 3,800
• Other Boring Bar Support Sizes + Sleeves Upon Request
• Custom Steady Rests Upon Request
• Fanuc Arbitrary Speed Threading + Thread Lead Teach: Spindle FWD $ 2,500
• Fanuc Arbitrary Speed Threading + Thread Lead Teach: Spindle FWD + REV $ 3,000
• 74.7” Swing Over Bed Upgrade Upon Request
• 82.6” Swing Over Bed Upgrade Upon Request
• 90.4” Swing Over Bed Upgrade Upon Request
• 98.3” Swing Over Bed Upgrade Upon Request
• Headstock Cooling Unit $ 2,800
• Transformer 480V to 220V $ 7,900
• Transformer with Voltage Regulator $12,700
• Full Enclosure Upon Request
• Additional Chip Conveyor
Front Rear
80” C.C. $ 7,600 $22,800
120” C.C. $ 8,700 $25,300
160” C.C. $10,700 $25,900
200” C.C. $11,500 $29,500
240” C.C. $12,800 $33,900
TURRET OPTIONS
• Sauter BMT-85 V12 Live Tooling Turret + 2.5° Spindle Indexing Upon Request
• Rear-Mounted H4 Hydraulic Turret (HP-350) [Factory Install] $29,900
• HP-350 H4 Hydraulic Turret in Front Position (No V8 Turret) [Factory Install] $ 8,000
• Tool Holders for V8, V12 & H4 Turret Upon Request
WORKHOLDING
• 50” 4-Jaw Independent Chuck w/ 2-pc Jaws (Taiwan Made) $ 31,500
• Soft Jaw Set (4 Jaws) for 50” 4-jaw Chuck Above $ 2,250
• 40” 4-Jaw Independent Chuck w/ 2-pc Jaws (Taiwan Made) $ 25,000
• 24” 3-Jaw Hydraulic Chuck + System for 7.1” Bore (6.4” bar capacity) $ 39,500
• 24” 3-Jaw Hydraulic Chuck + System for 10.1” Bore (8.0” bar capacity) $ 45,500
• Other Hydraulic, Air, & Manual Chucks Upon Request

Files

CSX59_Feb2023.pdf

Precision Rigging

Precision Finishing

SMC Auctions

1 - NEW KINGSTON 59" x 160" CNC LATHE, C TYPE, MODEL #: CSX x 4000

Equipped With

Not Quite What You're Looking For?

Get in Touch

Menu

Our Finance Options

Proud Member