| Swing Over Bed |
26 inches |
| Swing Over Cross Slide |
17.24 inches |
| Center Height |
13 inches |
| Swing Over Gap |
35 inches |
| Distance Between Centers |
78.7 inches |
| Spindle Nose Type |
D1-11 Camlock |
| Spindle Bore |
4.5 inches |
| Spindle Speeds (12) |
10-1,000 RPM |
| Taper of Spindle Bore |
MT#7 |
| Taper of Center |
MT#5 |
| Longitudinal Feeds – in/rev (18) |
0.0022 - 0.032” |
| Cross Feeds – in / rev {17} |
0.0026–0.035” |
| Inch Threads |
2-56 TPI {44} |
| Metric and Module Threads |
0.5-14mm {24} |
| D.P. Threads |
4-56 mm |
| Leadscrew Pitch, Diameter |
4 TPI, 1-1/2” |
| Cross Slide Travel |
13.75 inches |
| Compound Rest Travel |
6.2 inches |
| Compound Width |
6 inches |
| Bed Width |
15.75 inches |
| Bed Length |
120.5 inches |
| Quill Travel (graduated) |
6.5 inches |
| Quill Diameter |
3 inches |
| Quill Taper |
MT#5 |
| Spindle Motor (220V or 440V, 60, 3) |
15 HP |
| Dimensions |
137” x 41” x 52” |
| Net Weight (approx.) |
6656 pounds |
| Standard Color |
Gray |
| Total Power Consumptions |
230V, 16KVA/45 amps/ 460V, 16VA/22.5 amps |
Equipped With
FEATURES:
D1-11 Camlock
4.5” Spindle Bore
Direct Selection For Inch/Metric Threads
One Piece Cast Meehanite Bed
Quick Change Gearbox
15 HP Motor
12-Speed Gear Head (10-1,000 RPM)
STANDARD EQUIPMENT:
4-Jaw 16” Chuck
Coolant System
4 Way Tool Post
Halogen Work Light
Face Plate 20”
Steady Rest (4”-11.5”)
4-Way Carriage Stop
Splash Guard
16” Chuck Guard
Tailstock
Follow Rest ( 1.57” – 6.3”)
Wired 220V or 440V. Please Specify
Tool Kit: Machine Manual, Half Nut Wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip Screw Driver, Flat Head Screw Driver, Oil can, Grease Gun, Rear Way Cover Bracket, 2 sets of dead center, Pin for Indicator, and Can of Paint
Optional Features:
3 - Jaw Chuck 12” D1-11 (Bison) - 4.05” Bore: $2,725.00
3 - Jaw Chuck 16” D1-11 (Bison) - 5.34” Bore: $4,940.00
4 - Jaw Chuck 16” D1-11 (Bison): $2,970.00
3 - Jaw Chuck 15”, D1-11 (QU): $2,650.00
4 - Jaw Chuck 16” D1-11 (QU): $1,885.00
Taper Attachment (Factory order): $3,765.00
Installation of taper attachment: $835.00
Drill & Arbor (JACOBS): $830.00
Quick Change Tool Holder (Aloris) 7 pcs. : $2,480.00
Live Center – MT#5: $350.00
5C Lever Collet Closer ( Altas): $2,395.00
5C Collet Set (1/8 to 1/16” x 1/16”) 16 pcs.: $370.00
Micrometer Carriage Stop: $315.00
Steady Rest 12” ( 3.2”- 10.6”): $2,120.00
Steady Rest 15” ( 6.7” – 15.2”): $2,650.00
Roller Jaws Set (3 pcs): $1,300.00
Chuck Guard with limited switch ( factory order only): $650.00
Tool guard with limited switch ( factory order only): $2,320.00
Lead screw guard ( factory order only): $1,640.00
Guard behind spindle( factory order only): $90.00
UL( to meet state of California)/CSA switch board/UL motor/CSA pump in lieu of regular version ( factory order): $2,280.00
NOTE: SHARP DOES NOT PROVIDE UL/CSA STICKERS ON THE MACHINES, BUYERS NEED TO CONTRACT A LOCAL AGENCY TO REVIEW THE ISSUES THEN PUT “COMPLIANCE" STICKERS ON THE MACHINES AFTERWARDS.
*** UL compliance certificate issued by CSA Group: $4,860.00
DIGITAL READ OUT SYSTEMS:
Fagor 20i D.R.O.: $3,960.00
Fagor 40i D.R.O. : $4,540.00
Acu-Rite 203S D.R.O.: $4,815.00
Newall DP700 D.R.O.: $5,695.00
Newall NMS 800 DRO: $4,445.00
Factory Installation - D.R.O.: $790.00 NET
