SPECIFICATIONS: CAPACITY (MILD STEEL) --------------------- 1/4 in x 12 ft
SHEARING TONS AVAILABLE ------------------- 36
RAKE (IN INCHES PER FOOT) ----------------- .250 in
SHIPPING HEIGHT --------------------------- 90 in
WIDTH ------------------------------------- 174 in
DEPTH ------------------------------------- 87 in
NUMBER OF HOLD DOWN CYLINDERS ------------- 13
BORE OF HOLD DOWN CYLINDERS --------------- 2 in
HOLD DOWN TONS OF FORCE ------------------- 36
BLADE SIZE -------------------------------- 1 in x 3 in x 148 in
WEIGHT (APPROX.) -------------------------- 28,000 LBS.
HORSEPOWER -------------------------------- 25 HP.
STROKES PER MINUTE (FULL WIDTH CUT) ------- 13
(12 in WIDTH CUT) ------- 40
BELOW GRADE ------------------------------- NO
RAM SPEED IN INCHES PER MINUTE DOWN ------- 110
RAM SPEED IN INCHES PER MINUTE UP --------- 173 OPTIONAL FEATURES: SQUARING ARMS: (TOTAL LENGTH FROM EDGE OF BLADE)
ADDITIONAL 4 ft SQUARING ARM WITH SCALE ------- $800.00
(2 ft OFF TABLE)
8 ft SQUARING ARM WITH SCALE ------------------ $1,300.00
(6 ft OFF TABLE)
12 ft SQUARING ARM WITH SCALE ----------------- $1,800.00
(10 ft OFF TABLE)

All arms are mounted on right hand side - Also available
by request on left side of shear ---
LOW END OF RAKE IS ON RIGHT

TABLE MACHINING OPTIONS:
ADDITIONAL T-SLOTS MACHINED IN TABLE (F-B) - EA.$190.00
ADDITIONAL HAND SLOTS MACHINED IN TABLE ---- EA.$300.00
T-SLOT ACROSS FRONT EDGE OF SHEAR TABLE - FOR SLIDING
OPTIONAL SUPPORT ARMS ACROSS FRONT EDGE OF SHEAR -PER FT.
-------------------------------------------- $100.00

BALL TRANSFERS(HEAVY DUTY TRANSFERS ALLOW EASY MATERIAL
HANDLING):

NOTE: BALL TRANSFERS ARE STANDARD ON ALL 14 ft AND LONGER AND
1/2 in AND LARGER SHEARS. THESE TRANSFERS ARE MOUNTED IN
HOLES
IN THE TABLE.

6 ft SHEAR - 3 TRANSFERS ----------------- $1,000.00
8 ft SHEAR - 4 TRANSFERS ----------------- $1,300.00
10 ft SHEAR - 5 TRANSFERS ---------------- $1,700.00
12 ft SHEAR - 6 TRANSFERS ---------------- $1,900.00

TRANSFERS MOUNTED ON SQUARING AND/OR SUPPORT ARMS --$350.00
EA

SUPPORT ARMS:
24 in ARMS
(1)T-SLOT SUPPORT ARM ------------------- EA. $450.00
(1)T-SLOT SUPPORT ARM W/EMBEDDED SCALE -- EA. $600.00
(NO SCALE IN TABLE)
(1)T-SLOT SUPPORT ARMS W/SCALE & T-SLOT - EA. $1,100.00
(W/SCALE IN TABLE)

36 in ARMS
(1)T-SLOT SUPPORT ARMS------------------- EA. $800.00
(1)T-SLOT SUPPORT ARM W/EMBEDDED SCALE -- EA. $900.00
(NO SCALE IN TABLE)
(1)T-SLOT SUPPORT ARMS W/SCALE & T-SLOT - EA. $1,400.00

48 in ARMS
(1)T-SLOT SUPPORT ARM -------------------- EA. $1,000.00
(1)T-SLOT SUPPORT ARM W/ EMBEDDED SCALE -- EA. $1,300.00
(NO SCALE IN TABLE)
(1)T-SLOT SUPPORT ARM W/SCALE & T-SLOT IN THE TABLE
W/EMBEDDED SCALE ------------------------ EA. $1,900.00

ACCESSORIES FOR SQUARING ARMS & T-SLOTS:
SWING STOP FOR SQUARING ARM -------------- EA. $550.00
(1) DISAPPEARING (GRAVITY) STOP FOR T-SLOT-EA. $350.00
PROTRACTOR FOR ANGLE SHEARING ------------ EA. $750.00

BACKGAUGE OPTIONS:
48 in TRAVEL BACKGAUGE IN LIEU OF 36 in
(THIS OPTION WILL CAUSE OVER-WIDTH SHIPMENT. NOT REQUIRED
IF POWER SWING-AWAY ORDERED)------------------ $1,700.00

POWER SWING-AWAY BACKGAUGE WITH 48 in TRAVEL ---- $3,700.00

SWINGS ENTIRE BACKGAUGE UP AND OUT OF THE WAY AUTOMATICALLY
AT END OF TRAVEL-THIS OPTION COMES WITH 48 in TRAVEL. WILL
CAUSE OVER-WIDTH SHIPMENT. (MANUAL SWING-AWAY IS STANDARD
ON
ALL SHEARS)

INFINITELY VARIABLE, QUICK CHANGE BLADE GAP ADJUSTMENT:
BLADE GAP IS SET AUTOMAMTICALLY VIA THE CYBELEC CONTROLS
WHEN
OPERATOR INPUTS MATERIAL THICKNESS------------- $5,100.00


AUTOMATIC LUBRICATION SYSTEMS
REQUIRES AIR SUPPLY (80 PSI/.2 CFM)
ALL 10 GAUGE, 1/4 in AND 3/8 in X SHEARS UP TO 12 ft ONLY
REQUIRE LUBRICATION OF THE GIBBS.
ALL 1/2 in AND LARGER AND 14 ft AND LONGER SHEARS COME STANDARD
WITH A MANIFOLD CENTRALIZED LUBE SYSTEM AND ARE AVAILABLE
WITH THE AUTO LUBRICATION SYSTEM. THE AUTO LUBE SYSTEM
AUTOMATICALLY FEEDS THE REQUIRED EP-1 GREASE TO THE
LUBRICATION POINTS ON THE MACHINE VIA A GREASE RESERVOIR
------------------------------- -------------- $4,100.00

POWER RAKE ADJUSTMENT:
RAKE IS SET AUTOMATICALLY VIA CYBELEC CONTROL WHEN OPERATOR
INPUTS MATERIAL. THIS WILL MAKE THE RAKE FLATTER ALLOWING
LESS DISTORTION IN THIN STRIPS OF MATERIAL. --- $5,500.00

PAINT COLOR:
STANDARD COLOR IS BLUE WITH WHITE TRIM-CHARCOAL GREY
CAN BE ORDERED AT N/C, MUST BE REQUESTED ON PURCHASE ORDER.
FOR SPECIAL COLOR-SINGLE COLOR ONLY, SAMPLE MUST BE
SUPPLIED ---------------------------------------$700.00

SHEAR BLADES:
HI-CARBON, HI-CHROME BLADES IN LIEU OF STANDARD BLADES.
RECOMMENDED FOR CUSTOMERS USING APP. 75% OR MORE STAINLESS

8 ft AND 10 ft SHEARS -------------------- $900.00
12 ft SHEARS ----------------------------$1,000.00
14 ft SHEARS ----------------------------$1,100.00
16 ft SHEARS --------------------------- $1,200.00
20 ft SHEARS ----------------------------$1,400.00

EXTRA SET STANDARD SHOCK RESISTANT-HCHC BLADES----$P.O.R

HOLD DOWN CYLINDERS:
CYLINDERS WITH IMPACT PADS-FOR MAR-FREE APPLICATIONS---
----------------------------------------------$750.00

ADDITIONAL IMPACT PADS FOR HOLD DOWN CYLINDERS
FOR 10 GA., 1/4 in AND 3/8 in SHEARS ----------------$25.00 EA.
FOR 1/2 in AND LARGER SHEARS ----------------------$45.00 EA.

EXTRA HOLD DOWN CYLINDER OPPOSITE SIDE OF SHEAR ---$650.00
INDEPENDENT HOLD DOWN ACTUATION - ACTUATES ALL HOLD DOWNS
SIMULTANEOUSLY WITHOUT ACTUATING RAM ----------- $1,250.00

CNC SQUARE GAGUE/FRONT GAUGE SYSTEMS:
PRICES INCLUDE: SWING ARM PENDANT MOUNT FOR CONTROL &
SLOTS IN TABLE FOR DRIVES (IF ORDERED WITH NEW MACHINE).
ALL
PRICING IS SUBJECT TO CHANGE FOR MACHINES ALREADY IN
FIELD. BELOW ARE FREQUENTLY USED COMBINATIONS, CONTACT
FACTORY FOR SPECIAL COMBINATIONS. PRICING SUBJECT TO
CHANGE
AT ANY TIME.

PNEUMATIC SHEET SUPPORT SYSTEMS: (PRICES INCLUDE
INSTALLATION)
CONTACT FACTORY FOR OTHER LENGTH SYSTEMS. QUOTED SYSTEMS
ARE FOR 10 GA. ALSO

SHEET SUPPORT SYSTEMS:(DOES NOT INCLUDE CONVEYORS OR
STACKERS)
MODEL 36 in TRAVEL
AS250-6 $11,900.00
AS250-8 $13,300.00
AS250-10 $14,600.00
AS250-12 $16,000.00
AS250-14 $18,400.00
AS250-16 $21,200.00

FOR 48 in TRAVEL ADD ------------------- $2,100.00
FOR 3/8 in SHEARS ADD ------------------ $2,000.00 TO ABOVE
FOR 1/2 in SHEARS ADD--------------------$2,500.00 TO ABOVE

CONVEYORS:
PRICES INCLUDE ABOVE SHEET SUPPORTS & TRIM CUT CONTAINERS
MODEL
AS250-6 $26,800.00
AS250-8 $27,900.00
AS250-10 $29,600.00
AS250-12 $30,900.00
AS250-14 $34,700.00
AS250-16 $40,400.00

FOR 48 in TRAVEL ADD --------------------------$1,800.00
FOR 3/8 in SHEARS ADD -------------------------$2,000.00
FOR 1/2 in SHEARS ADD -------------------------$2,500.00

STACKERS: (PRICES BASED ON ORDER W/CONVEYOR)
MODEL
AS250-6 $9,300.00
AS250-8 $9,500.00
AS250-10 $9,700.00
AS250-12 $9,900.00
AS250-14 $10,500.00
AS250-16 $10,900.00

ELECTRIC COUNTER --------------------------------$600.00
ADDITIONAL SCRAP CONTAINER ----------------------$700.00
REMOTE ON/OFF SWITCH ----------------------------$600.00
MAR-FREE CONVEYING FOR 10 ft & UNDER SYSTEMS ----- $1,600.00
12 ft SYSTEMS --------------$2,100.00

OIL COOLER:
FAN RADIATOR TYPE -THIS IS STANDARD ON ALL 3/4 in AND LARGER
SHEARS WITH ALL OPTIONAL HI-SPEED SYSTEMS ----- $2,100.00

HIGH SPEED SYSTEMS:
horsepower WILL INCREASE WITH HI-SPEED SYSTEMS
NORMAL FULL HIGH SPEED FULL
LENGTH SPM LENGTH SPM
AS250-10 - 15 20 - $5,500.00
AS250-12 - 14 19 - $5,500.00
AS375-10 - 13 21 - $5,900.00
AS375-12 - 9 18 --$5,900.00
AS500-10 - 9 17 --$7,900.00
AS500-12 - 8 14 --$8,000.00

CONTACT FACTORY FOR OTHER HI-SPEED SYSTEMS
SAFETY SYSTEMS:
LIGHT CURTAIN SAFETY BARRIER SYSTEM IN LIEU OF STANDARD
AWARENESS BARRIER ---------------------------- $4,800.00

CAN ALSO BE QUOTED ON BACK OF MACHINE TO ENCLOSE GAUGING
AREA AND/OR IN ADDITION TO STANDARD AWARENESS BARRIER

PHYSICAL BARRIERS/CAGES TO ENCLOSE BACK OF SHEAR:
EXTREMELY HEAVY DUTY CAGE THAT SURROUNDS ENTIRE BACK OF
MACHINE WITH INTERLOCKING GATE SYSTEM THAT SHUTS MACHINE
DOWN WHEN OPEN --------------------------------- $8,100.00

COMPLIANCE OPTIONS:
UL COMPLIANCE, CSA, ZED
AS STANDARD ALL COMPONENTS ARE U.L. LISTED BUT SYSTEM AS
A WHOLE IS NOT U.L. COMPLIANT. THIS OPTION WILL MAKE THE
MACHINE U.L. COMPLIANT HOWEVER THE MACHINE WILL STILL
REQUIRE A U.L. OFFICER TO FINALIZE THE PROCESS ONSITE AT
FACILITY.------------------------------------ $2,500.00

OTHER COMPLIANCE OPTIONS MAY BE AVAILABLE UPON REQUEST.

EXTENTED WARRANTY SERVICE:
THIS PACKAGE INCLUDES:
A 7 YEAR PARTS IN LIEU OF STANDARD 5 YEAR PARTS WARRANTY
A 2 YEAR PLC AND CNC WARRANTY
A 5 YEAR ONSITE LIMITED LABOR WARRANTY
IN THE EVENT OF A PROBLEM THE CUSTOMER WILL BE REQUIRED TO
HELP TROBLESHOOT THE SITUATION OVER THE PHONE. IN THE EVENT
THE PROBLEM CANNONT BE DIAGNOSED AND TROUBLESHOOTING HAS
BEEN EXHAUSTED, STANDARD INDUSTRIAL WILL SEND IN A
TECHNICIAN
AT NO CHARGE TO RESOLVE THE SITUATION.

.135, .250 in THROUGH .375 in CAPACITY SHEARS -------$4,500.00
.500 in THROUGH .625 in CAPACITY SHEARS -------------$5,600.00
.750 in THROUGH 1.500 in CAPACITY SHEARS ----------$7,800.00

START-UP/ TRAINING/ MAINTENANCE SERVICE
ONSITE FACOTORY TRAINING/ START-UP IS NOT INCLUDED OR
REQUIRED WITH PURCHASE OF A NEW SHEAR. DUE TO THE
SIMPLICITY OF OUR MACHINERY FORMAL TRAINING IS RARELY
REQUIRED.

IF ONE DAY TRAINING/ START-UP FOR THE MACHINE IS REQUIRED
ADD TE FOLLOWING CHARGE (DOES NOT INCLUDE PHYSICAL
INSTALLATION/RIGGING/ELECTRICAL HOOK-UP, OIL INSTALLATION:
ALL OF WHICH ARE TO BE COMPLETE BEFORE SERVICE TECHNICIAN
ARRIVES).
PACIFIC/MOUNTAIN TIME ZONE ---------------- $2,900.00
CENTRAL TIME ZONE --------------------------$1,900.00
EASTERN TIME ZONE --------------------------$2,500.00
FOR EACH ADDITIONAL DAY REQUIRED ADD -------$600.00